"美氏M6361"酸性硅酮密封膠是一種酸性固化的高性能密封膠:1)固化迅速;2)固化收縮率低;3)在低溫(-45℃)至高溫(+164℃)內保持良好彈性;4)柔軟抗震,耐變形;5)對于多數(shù)基材有良好的兼容性;6)用于各類門窗安裝. 說明: 1)施工溫度在5°C~40°C之間; 2)用兩塊布法清潔基材; 3)將膠嘴按需要的大小做45°切斷; 4)將膠打滿接縫處; 5)10分鐘內結皮.  重要: 1)使用前請做材料相容性測試; 2)不用于銅,鋅和磚石材料; 3)不用于幕墻結構性裝配或表面溫度(45℃)以上的材料; 4)不用于滲出油污或溶劑的材料； 5)在足夠通風條件下使用. 注意: 遠離兒童! 避免接觸眼睛和皮膚! 如有接觸,請用水沖洗;仍然不適的請就醫(yī)檢查. 執(zhí)行標準: GB/T14683-2003. 保質期: 7個月(<24℃)   "MEISHI M6361" acidity silicone sealant is a acidic curing high performance grade silicone sealant:1)Rapid solidification;2)Low shrinkage on curing;3)Keep elastic in low(-45℃) and high(+164℃) temperatures;4)High grade soft,be able to bear oscillation;5)Good adhesion to many substrates;6)Applicable to the assembly of various doors and windows. DIRECTIONS: 1)Construction applicable between 5℃~40℃; 2)Substrates should be solvent cleaned using two clothes method; 3)Cut the nozzle to desired opening at 45°angle ; 4)Fill the joint completely; 5)Formation of skin in 8 minutes. IMPORTANT: 1)Please do material compatibility testing before use； 2)Not for copper,zinc and stone; 3)Do not use in structural applications or where surface temperatures exceed 45℃ for material safety; 4)Incompatible oozing out oily or solvents; 5)Apply in Plenty of air. PRECAUTIONS: Keep out of the reach of children! Avoid contact with eyes and skin! In case of contact,flush with lot water;If still indisposed,consult a doctor. STANDARS: GB/T 14683-2003. STORAGE: 7 Months(<24℃).