“美氏M6478”中性硅酮密封膠是一種中性固化的高性能密封膠: 1)不腐蝕基材;  2)固化收縮率低;  3)在低溫(-45℃)至高溫(+164℃)內保持彈性; 4)柔軟抗震,耐變形;  5)適合于玻璃,鋁材,石材,混凝土,磚瓦,陶瓷,塑料間的非結構性粘結密封： 6）在鉛、鎘等六項有害物質的含量上達到了ROHS指令的要求，可以在歐盟范圍內進行銷售。 說明: 1)施工溫度在5℃~40℃之間; 2)用兩塊布法清潔基材; 3)將膠嘴按需要的大小做45°切斷; 4)將膠打滿接縫處。 重要: 1)使用前請做材料相容性測試; 2)不用于結構性裝配或表面溫度(45℃)以上的材料; 3)不用于滲出油污或溶劑的材料。 注意: 遠離兒童! 避免接觸眼睛和皮膚! 如有接觸,請用水沖洗;仍然不適的請就醫檢查。 執行標準:GB/T14683-2003 保質期:9個月(<24℃).   “MEISHI M6478”neutral silicone sealant is a neutral cure high perfomance grade silicone sealant:  1)Not corrosion to the materials;  2)Low shrinkage on curing;  3)Keep elastic in low(-45℃) and high(+164℃) temperatures; 4)High grade soft,be able to bear oscillation;  5)Suitable for glass,aluminum material,stone,concrete, brick, ceramic, plastic, non-structural bonding and sealing； 6）In the lead, cadmium and other hazardous substances six reached the ROHS directive, can be sold within the EU   DIRECTIONS: 1)Construcation applycable between 5℃~40℃; 2)Substrates should be solvent cleaned using two clothes method; 3)Cut the nozzle to desired opening at 45°angle; 4)Fill the joint completely. IMPORTANT: 1)Please do material compatibility testing before use; 2)Do not use in structural applications or where surface temperatures exceed 45℃ for material safety; 3)Incompatible oozing out oily or solvents. PRECAUTIONS: Keep out of the reach of children! Avoid contact with eyes and skin! In case of contact,flush with lot water;If still indisposed,consult a doctor. STANDARS: GB/T14683-2003 STORAGE: 9 Months(<24℃).