▲ 適用范圍 適用于玻璃、光盤、銘牌、不干膠、陶瓷花紙、木制玩具拼圖和電子行業 PCB、SMT錫膏、薄膜開關等的平面印刷，也適用于以金銀卡紙、金屬薄板、PVC等為基材，套印精度要求高的產品的平面印刷。 主要性能： 1. 立式結構，網版垂直式升降采用電動式，印刷頭左右動作采用電動驅動。 vertical structure with the electronic driven printing plate goes up anddown vertically, and the electronic driven print head moves left/right.     2. 氣動控制印刷刀架升降，光電眼控制行程，獨立調校。 Pneumatic controller controls the printing knife moves up and down, photocell eyecontrols the stroke, which is independent to tune. 3. 設用手動/半自動/全自動三種模式，印刷間接時間數字控制。 Set manual/semi-automatic /automatic three modes , the break time ofprinting is digital controlled. 4. 獨立設計的機頭升降裝置，刮墨刀/回油刀、網版裝卸和網版清洗方便。 Independent designed head rising and down setting, makes it convenient to clean thescraping blade/reclaiming blade、screen plateduring loading and unloading.    5. 雙導柱左右網夾臂，同時安裝版距調節裝置，調整方便。 Double guide column master the clamps arm,and install the adjusting device to adjust the distance between plates at thesame time, which is convenient to tune. 配置說明： 1. 機器控制采用PLC控制器。 The machine controlled by PLC controller. 2. 電路采用歐姆龍繼電器，正泰交流接觸器，臺灣陽明光電眼開關。 Circuits adopt Omron relay, ACcontactor chint , RIKO Photoelectric eye switch produced inTaiwan. 3. 印刷采用臺灣成邦齒輪減速馬達，雙變頻印刷驅動。 Adopt Cheng Bang GearMotor from Taiwan, driven by Variable printing. 4. 印刷刮刀，回墨刀采用日本SMC品牌氣動元件控制。 Printing scraper and reclaimingblade controlled by Japanese SMC brand pneumatic component. 5. 印刷升降/左右運動采用臺灣產ABBA精密導桿。 moves up and down/left and right during printing,controlled by Taiwan ABBA Precision guide rod. 6．左右橫刮采用臺灣產HIWIN（上銀）精密直線導軌。 Left/right scratchers adopt HIWINprecision liner guide from Taiwan. 7．印刷臺板采用吸氣不銹鋼和上海國營廠生產的吸氣系統。 Printing plate adopts pneumatic stainless steel andsuction system which is produced by Shanghai State-owned factory. 詳細參數 產品型號   TDS-1027XT 臺面尺寸 print table size(D*W,mm)   1100*2900 較大印刷面積Max print size (D*W,mm)   1000*2700 較大網框外徑Max frame size (D*W,mm)   1300*3200 印件厚度print thickness(mm) 0-50 離網高度Frame-off height (mm)   0-40 印刷頭速度 print speed(mm/sec) 60-900 適用電源 Power 3相, 380V,50/60Hz 壓縮氣源Air press(Kg/cm2) 6-8 機體尺寸Machine size (WXDXH,mm)   3500*1400*1700 機器重量Machine Weight (Kg)   1500