技術參數Technical Parameter:   GX25 zui大加工寬度 Max.processing width: 2500mm zui小加工尺寸 Min.processing size: 400*400mm 加工玻璃厚度 Processing thickness: 3~30mm Process speed: 2~10m/min 毛刷數量Brush quantity: 4對/pairs 風刀數量Air-Knifes： 2pairs 重量Weight: 3500KG 功率Power: 25KW 尺寸Size: 6000*2700*3300mm     簡要說明: 1.主傳動采用齒輪傳動,變頻調速,數字顯示,清洗部毛刷輥轉動分別由上、下兩組電機du li皮帶傳動，轉動速度平穩，使用壽命長； 2.清洗部、風干部整體升降、zui大程度為350mm便于清洗和保養； 3.四對毛刷配置，可清洗low-e玻璃，普通鍍膜和陽光鍍膜玻璃； 4.二對風刀配置，風力大，風干效果好，帶加熱系統。 1.Gear driving system for the main transmission, frequency speed control, and digital display. The machine is running smoothly and quietly. 2.Brushes are drove by separate motors and belts, it guarantee a smooth speed and a long service life. 3.Washing section and drying section can be rose up Max. to 350mm as a whole, which is convenient to clean and maintain. 4.The machine has four pairs of brushes, which can be used for washing LOW-E glass, ordinary coated, and solar glass. 5.The machine has two pairs of air-knifes, they can bring you a very good drying effect. Also, the machine has a heating system, it helps a lot in the winter weather.